Bushings, Bearings, Axles, Hardware

KC Racing Independent Front Axle

Faster cornering with low drag independent front wheels.

3/32" front axle with 4 mm hex locknuts.

3" wide axle for hardbody fronts.

Nuts on the axle ends to adjust end play and easily swap out the front wheels for various track configurations.

Wheel nuts - You can precisely set the wheel preload on shims.

A FULL 3/32” (.0935”) diameter - You can set your ‘wheel to axle’ clearance to reduce wobble eliminating additional friction from overtightened nuts.

(For optimal performance ream your wheels to 0.09420” for a maximum clearance of 0.0007”. You can get reamers at McMaster-Carr.)

Remove your wheel set screws and use the opening as an oil hole.