BLDC Motors / ESCs

Brushless Mafia (BLDC) for Slot Car - 11000KV

Application - Road Course, not for drag racing.  
For the Advanced Racer.

Join the brushless revolution in slot car racing.  KC Racing has partnered with a world leading manufacturer of BLDC motors to develop an outrunner brushless motor specifically suited for slot car installations.  Completely built and tested by the manufacturer, this motor receives rigorous testing of the factory to insure quality and consistency.  Certifications of CE and ISO 9001:2015

-Weight: 7.6g (including wires)
-Motor Size: 14.2mm x 12.8mm
-Stator Diameter: 11mm
-Stator Height: 6mm
-Rotor: 9N6P
-Wire strap to maintain clearance of the wiring and the bell
-Pinion Shaft Diameter: 1.5mm x 10.00mm long
-Minimum clearance for snap ring on pinion side: 5mm
-Rotor Side Shaft Diameter: 2.00mm x 6.0mm long
-Motor Mounting: 9mm x 9mm
-Motor Cable: 26#AWG  85mm long with an XH 2.54 3P male connector on the end of the wiring.
-NSK Bearings
-7075-T6 Aluminum Bell
-Multicolor color design

SUGGESTED ESC - X89PRO
Design Volts – 14.25v
Temperature range - 0˚- +65˚C (32˚ - +150˚F)

RPM @ 12 vdc
18000 KV - 216,000

Includes four (4) M2x4mm Button Head Screws and four (4) M2x6mm Button Head Screws or mounting. Make sure the screws DO NOT contact the motor winding.

Download the motor manual here

It is up to the user to observe BLDC heat, ESC compatibility to preventing cogging and use of suitable ratios to prevent ESC and/or BLDC failures.